Tarahan Fully Hydraulic Block Making Machine
The M.B Series Fully Hydraulic Block Making Machine from Tarahan is a silo-equipped (hopper-type) machine.
The silo is designed to store raw materials, allowing the machine to continuously produce blocks without interruptions, increasing overall production efficiency.
To maximize production capacity, materials should be transferred to the machine’s hopper using a tractor with a loader, skid steer (Bobcat), front loader, or dumper.
If these are unavailable, a hoist system can be installed behind the machine to feed materials, although this increases wear on the machine and reduces production capacity.
Specifications of Tarahan Fully Hydraulic Block Making Machine
- Japanese bearings
- Motors from Motogen
- Italian hydraulic hoses
- Turkish or Taiwanese hydraulic valves
- Adjustable vibration power for each production cycle
- Adjustable cushioned operator seat
- Hardened chrome-plated guide rods
- German vibration dampers to prevent vibration transfer to the frame
- Equipped with an inverter for smooth and impact-free movement
- Mortar cart with reinforced rubber strips for upper and lower mold cleaning
- Adjustable hydraulic pressing system up to 160 bar for standard block production
- Robust industrial chassis design resistant to vibration and force, reducing wear and tear
- Vibration-dampened electrical panel to extend component lifespan, using LS/Hyundai electrical components
Required Auxiliary Equipment
- 800-liter mixer
- 50-amp three-phase power supply
- Loader, skid steer (Bobcat), or tractor
- A flat concrete surface of at least 1,000 to 2,000 square meters
Optional Systems for the Tarahan Fully Hydraulic Block Making Machine
1. Smart PLC System (Fully Automatic Mode)
This system allows the machine to operate automatically without an operator.
Advantages of the PLC System:
- Reduces machine wear and tear
- Provides easy and automatic troubleshooting
- Minimizes labor requirements
- Allows customized production control
- User-friendly interface via a touchscreen monitor
2. Hoist or Winch System
If a loader or forklift is not available to fill the hopper, a hoist or winch system can be installed to supply materials.
Production Capacity Per Cycle
| Block Type | Quantity per Cycle |
|---|---|
| 20 cm Block | 6 blocks |
| 15 cm Block | 8 blocks |
| 10 cm Block | 11 blocks |
