In 2018 Tarahan Machinery exported a dry-type batching plant 80 to Erbil, the capital of the Kurdistan Region of Iraq. After delivery, the plant was installed and commissioned at the project site and made ready to produce concrete.
A batching plant weighs cement, water, aggregates (sand and gravel) and admixtures in set proportions and mixes them to produce ready-mix concrete on an industrial scale. For a fuller explanation, read What is a batching plant?
About the Tarahan batching plant 80
The 80 model is listed in the Tarahan range as the stationary batching plant 80 (S.BP 80) and is built for ready-mix concrete plants and large civil projects. Current specifications of this model, according to its product page:
- Output of 80 m³/h with the dry system and 40 m³/h with the wet system
- 2 m³ mixer
- 1,000 kg cement scale with three load cells
- 8-inch cement screw and 3 × 10 m³ aggregate feeder
- Fully automatic control system with an insulated control room
- Required site area of about 800 m²
Shipping and installation in Erbil
The modular design of this model makes it simple to haul the parts by trailer and assemble them on site. The equipment, including the aggregate feeder and the cement silo, was loaded onto trailers and shipped to Iraq in late August 2018.


Once the equipment arrived, the plant was assembled, installed and commissioned in Erbil, and after commissioning the customer expressed satisfaction with the plant and with Tarahan’s service. The photo at the top of this article shows the batching plant after installation at the project site.
To see the other models, visit the batching plant page and the stationary batching plants category.
2018










